Picture 025.jpg 2014 hits | 60.69 KB | Posted: 3/8/04 Here is a pic with the Rockford HX2 12" installed, with the Kicker VR12 grill. If you look closely you can see the fiberglass strips that have been laid along the top/bottom/right side to make the box airtight.
Picture 020.jpg 1588 hits | 50.7 KB | Posted: 3/8/04 Here is an initial look of the finished idea.
Picture 020.jpg 1539 hits | 50.7 KB | Posted: 3/8/04 Here is an initial look of the finished idea.
Picture 022.jpg 1507 hits | 41.71 KB | Posted: 3/8/04 Here is the "plan B" panels that fit into the carpet cut-out of the door panel.
Picture 021.jpg 1630 hits | 53.94 KB | Posted: 3/8/04 Door after sound proofing mat installed
Picture 007.jpg 1551 hits | 37.62 KB | Posted: 3/8/04 Here is how I "boxed in" the rear door's latch and handle with cardboard prior to covering it in fiberglass to make the rear door airtight.
Picture 004.jpg 1555 hits | 51.82 KB | Posted: 3/8/04 This pic shows the cut-out for my original idea of creating a new door facia that would completely replace the old one. I got the idea from Al & Ed's AutoSound on the web. But after cutting the hole I found out the door is extremely concave and tha...
Picture 003.jpg 1703 hits | 47.04 KB | Posted: 3/8/04 Here is the door without the trim panel and the plastic waterproof barrier.
Picture 002.jpg 1640 hits | 42.1 KB | Posted: 3/8/04 Here is the stock look before any work.
Most Viewed Files
Picture 025.jpg 2014 hits | 60.69 KB | Posted: 3/8/04 Here is a pic with the Rockford HX2 12" installed, with the Kicker VR12 grill. If you look closely you can see the fiberglass strips that have been laid along the top/bottom/right side to make the box airtight.
Picture 003.jpg 1703 hits | 47.04 KB | Posted: 3/8/04 Here is the door without the trim panel and the plastic waterproof barrier.
Picture 002.jpg 1640 hits | 42.1 KB | Posted: 3/8/04 Here is the stock look before any work.
Picture 021.jpg 1630 hits | 53.94 KB | Posted: 3/8/04 Door after sound proofing mat installed
Picture 020.jpg 1588 hits | 50.7 KB | Posted: 3/8/04 Here is an initial look of the finished idea.
Picture 004.jpg 1555 hits | 51.82 KB | Posted: 3/8/04 This pic shows the cut-out for my original idea of creating a new door facia that would completely replace the old one. I got the idea from Al & Ed's AutoSound on the web. But after cutting the hole I found out the door is extremely concave and tha...
Picture 007.jpg 1551 hits | 37.62 KB | Posted: 3/8/04 Here is how I "boxed in" the rear door's latch and handle with cardboard prior to covering it in fiberglass to make the rear door airtight.
Picture 020.jpg 1539 hits | 50.7 KB | Posted: 3/8/04 Here is an initial look of the finished idea.
Picture 022.jpg 1507 hits | 41.71 KB | Posted: 3/8/04 Here is the "plan B" panels that fit into the carpet cut-out of the door panel.
